Car TPMS with High-Pressure Anti-Theft External Cap 2x Sensors

Car TPMS Tyre Pressure Monitoring System with High Anti-Theft Pressure External Cap Sensors

Drive with confidence knowing your tyres are always under control. This Car TPMS delivers real-time tyre pressure and temperature monitoring for up to four tyres, helping prevent blowouts, improve fuel efficiency, and extend tyre life. With high anti-theft external cap sensors and easy plug-and-play installation, its a smart safety upgrade for sedans, SUVs, and utes.

PRODUCT FEATURES

Real-time Monitoring

Provides real-time pressure and temperature for each tyre, which prevents dangerous blowouts, improves fuel efficiency, extends tyre life through even wear. Monitor your tyre pressure accurately from 0 to 87 PSI and temperature data within 1.5 PSI or 3F accuracy.

Monitors up to 4 Tyres

Monitors up to 4 tyres, designed for Sedan Cars, SUVs and Utes.

High Pressure Anti-Theft External Cap Sensors (0-188 PSI)

It comes with High Pressure Anti-Theft External Cap Sensors making them difficult to unscrew without the tool. Accurately detects tyre pressures from 0 to 188 PSI these are designed for RVs, Trailers, or commercial trucks, where pressures might exceed 100 PSI.

Easy Installation

The monitor plugs directly into the 12V auxiliary power outlet; there is no need for complex wiring or professional installation.

5 Alarms Modes for Enhanced Safety

High-Pressure Alarm: Triggers if a tyre pressure exceeds a safe, pre-set threshold, which can be caused by heat build-up or overinflation.
Low-Pressure Alarm: Alerts the driver when tyre pressure drops below a minimum safe level, which is a key safety feature to prevent underinflation, potential tyre damage, and accidents.
High-Temperature Alarm: Warns if the internal temperature of a tyre exceeds a certain limit, often an indication of overwork, underinflation, or a mechanical issue.
Fast Leakage Alarm: Provides an immediate warning in the event of a quick loss of air pressure, such as from a puncture.
Sensor Low Battery Alarm: Indicates when a specific TPMS sensor's internal battery is running low, ensuring the system remains functional.

TPMS Sensor ID Learning Steps

Step 1: In standby mode, press the ""SET"" button 5 times to enter learning ID mode.
Step 2: Short press the ""SET"" button to select the tyre location and install the sensor to the tyre valve.
Step 3: The sensor will automatically send its own ID to the display, wait until you hear six beeps to confirm that the code is received.
Step 4: After all sensors are programmed to the monitor, press and hold the ""SET"" button for 3 seconds to save the settings.

The middle button represents the tyre location; 0 is for the left front tyre (LF), 1 is for the right front tyre (RF), 2 is for the right rear tyre (RR) and 3 is for the left rear tyre (LR).

Colour Screen

Providing you clear and easy-to-read tyre pressure and temperature data in any light condition.

Wide Sensor Compatability

Designed to work with High-Pressure Flow-Thru TPMS Sen